• No products in the cart.

Course Currilcum

    • Knowing JAP 00:00:00
    • Elaborating JAP 00:00:00
    • All about Chalo India Startup Drive 00:00:00
    • Introduction to AutoCAD Interface 00:00:00
    • Introduction to AutoCAD user interface 00:00:00
    • AutoCAD Navigation Tools 00:00:00
    • Understanding Co-ordinate system 00:00:00
    • Limits and Units 00:00:00
    • Creating a Template 00:00:00
    • Making Lines 00:00:00
    • Lines using Polar 00:00:00
    • Circles in AutoCAD 00:00:00
    • Arc in AutoCAD 00:00:00
    • Ellipses 00:00:00
    • Rectangles 00:00:00
    • Introduction to Polyline and Spline 00:00:00
    • Points and Revision Clouds 00:00:00
    • Construction Line and Ray 00:00:00
    • Move and Copy command 00:00:00
    • Rotate command 00:00:00
    • Offset command 00:00:00
    • Trim and Extend 00:00:00
    • Erase, Explode and overkill 00:00:00
    • Stretch command 00:00:00
    • Break and Join 00:00:00
    • Lengthen and Reverse 00:00:00
    • Creating Basic Hatches Part-1 00:00:00
    • Set Origin And Associative Hatch 00:00:00
    • Layer Part-1 00:00:00
    • Layer Part-2 00:00:00
    • Text Part-1 00:00:00
    • Dimension Part-1 00:00:00
    • Dimension Part-2 00:00:00
    • Multileader 00:00:00
    • Block 00:00:00
    • Groups 00:00:00
    • Attributes 00:00:00
    • AutoCAD Exercise-1 00:00:00
    • AutoCAD Exercise 1 in Tamil Unlimited
    • AutoCAD Exercise 2 00:00:00
    • AutoCAD Exercise 2 in Tamil Unlimited
    • Isometric 00:00:00
    • Parametric 00:00:00
    • Page Setup, Layout & Plots 00:00:00
    • AutoCAD ā€˜Do it Yourselfā€™ 1 In Tamil Unlimited
    • AutoCAD ā€˜Do it Yourselfā€™-2 In Tamil Unlimited
    • AutoCAD ‘Do it Yourself’-3 In Tamil Unlimited
    • AutoCAD ‘Learn with Us’ Exercise-1 00:00:00
    • AutoCAD ‘Do it Yourself’-4 In Tamil Unlimited
    • AutoCAD ‘Do it Yourself’-5 In Tamil Unlimited
    • AutoCAD ‘Learn with Us’ Exercise-2 00:00:00
    • AutoCAD ‘Do it Yourself’-6 In Tamil Unlimited
    • AutoCAD ‘Do it Yourself’-7 In Tamil Unlimited
    • AutoCAD ‘Learn with Us’ Exercise-3 00:00:00
    • Introduction to Civil Planning 00:00:00
    • Staircase Calculation & Drafting 00:00:00
    • Elevation 00:00:00
    • Detaining 00:00:00
    • X ref 00:00:00
    • Table & Table Styles 00:00:00
    • Introduction to SOLIDWORKS 00:00:00
    • User Interface of SOLIDWORK 00:00:00
    • Customizing Command Managers and Toolbars in SOLIDWORKS 00:00:00
    • Starting a New File and Opening an Existing one in SOLIDWORKS 00:00:00
    • Entering the Sketching Environment 00:00:00
    • Creating Circles 00:00:00
    • Creating Arcs 00:00:00
    • Creating Rectangles 00:00:00
    • Creating Polygons 00:00:00
    • Creating Splines 00:00:00
    • Creating Slots 00:00:00
    • Placing Points 00:00:00
    • Creating Ellipses and Elliptical Arcs 00:00:00
    • Creating Equation Driven Curves 00:00:00
    • Drawing Display Tools 00:00:00
    • Practice Example 1 00:00:00
    • Common introductory tools in CATIA-! 00:00:00
    • Common introductory tools in CATIA-II 00:00:00
    • Common introductory tools in CATIA-III 00:00:00
    • Initial basic settings in CATIA 00:00:00
    • catia theory part 1 00:00:00
    • catia theory part 2 00:00:00
    • CATIA Sketcher workbench introduction 00:00:00
    • Basic profile tools to draw sketches1 00:00:00
    • Basic profile tools to draw sketches2 00:00:00
    • Basic constraint tools1 00:00:00
    • Basic constraint tools2 00:00:00
    • Predefined profiles tools1 00:00:00
    • Predefined profiles tools2 00:00:00
    • Predefined profiles tools3 00:00:00
    • Drawing circle and arcs1 00:00:00
    • Drawing circle and arcs2 00:00:00
    • Using connect tool and drawing ellipse 00:00:00
    • Drawing lines by line tool 00:00:00
    • Drawing points 00:00:00
    • Using constraint tool in detail1 00:00:00
    • Using constraint tool in detail2 00:00:00
    • Creating corner and chamfer operations 00:00:00
    • Creating trim operations 00:00:00
    • Creating trim operations – Part 2 00:00:00
    • Using operation transformation tools1 00:00:00
    • Using operation transformation tools2 00:00:00
    • Using operation transformation tools3 00:00:00
    • Analyzing sketch 00:00:00
    • Adding material by using pad tool 1 00:00:00
    • Adding material by using pad tool 2 00:00:00
    • Adding material by using pad tool 3 00:00:00
    • Pad, Pocket 00:00:00
    • Removing material by using pocket tool 00:00:00
    • Adding revolved material by using shaft tool 00:00:00
    • Removing material by groove tool 00:00:00
    • Creating holes 1 00:00:00
    • Creating holes 2 00:00:00
    • Adding material along guide by rib tool 1 00:00:00
    • Adding material along guide by rib tool 2 00:00:00
    • Creating stiffening ribs 00:00:00
    • Adding material by using multi-section tool 1 00:00:00
    • Adding material by using multi-section tool 2 00:00:00
    • Adding material by using multi-section tool 3 00:00:00
    • Adding material by using multi-section tool 4 00:00:00
    • Adding material by using multi-section tool 5 00:00:00
    • Adding material by using multi-section tool 6 00:00:00
    • Creating rectangular pattern of features 00:00:00
    • Practice model 1 00:00:00
    • Practice model 2 00:00:00
    • Practice model 3 00:00:00
    • Practice model 4 00:00:00
    • Practice model 5 00:00:00
    • Practice model 6 00:00:00
    • Practice model 7 00:00:00
    • Practice model 8 00:00:00
    • Practice model 9 00:00:00
    • Practice model 10 00:00:00
    • Datum 00:00:00
    • Rib , slot 00:00:00
    • Mirror & pattern 00:00:00
    • Using thickness tool 00:00:00
    • Applying threading/tapping 00:00:00
    • STAMP 00:00:00
    • Sheetmetal wall on edge with bend, fold and unfold 00:00:00
    • Sheet metal parameters,Wal, Wall on Edge, Extrusion, Flange 00:00:00
    • Dress up features, surface based feature 00:00:00
    • Using surface creation tool extrude and revolve 00:00:00
    • Creating surface by using sweep tool 00:00:00
    • Volume extrude and shape morphing 00:00:00
    • WARP CURVES 00:00:00
    • Mating Flange 00:00:00
    • Shape morphing, junction, Diabolo 00:00:00
    • Surface practice 1 00:00:00
    • Surface practice 2 00:00:00
    • Surface practice 3 00:00:00
    • Surface practice 4 00:00:00
    • Surface practice 5 00:00:00
    • Sheetmetal parameter 00:00:00
    • Using bending fold and unfold tools 00:00:00
    • Pattern, Hopper , rolled wall , fold and unfold 00:00:00
    • Sheetmetal practice 1 00:00:00
    • Sheetmetal practice 2 00:00:00
    • Sheetmetal practice 3 00:00:00
    • Sheetmetal practice 4 00:00:00
    • Sheetmetal practice 5 00:00:00
    • Inserting component in assembly 00:00:00
    • Assembly practice 1 00:00:00
    • Assembly practice 2 00:00:00
    • Assembly practice 3 00:00:00
    • Assembly practice 4 00:00:00
    • Assembly practice 5 00:00:00
    • Drafting practice 1 00:00:00
    • Drafting practice 2 00:00:00
    • Drafting practice 3 00:00:00
    • Drafting practice 4 00:00:00
    • Drafting practice 5 00:00:00
    • Existing Component, Manipulation, Constraints 00:00:00
    • wall on edge 00:00:00
    • part modeling-Extrude boss base/Extrude cut 00:00:00
    • part modeling-Revolve boss/base 00:00:00
    • part modeling-Revolve cut 00:00:00
    • part modeling-fillet and various types of fillet 00:00:00
    • part modeling-chamfer 00:00:00
    • part modeling-hole wizard 00:00:00
    • linear pattern,circular pattern,table pattern,curve driven pattern. 00:00:00
    • part modeling-sketch driven pattern,fill pattern,variable pattern 00:00:00
    • part modeling-draft,rib feature 00:00:00
    • part modeling-reference geometry(plans,axis,coordinate,points) 00:00:00
    • part modeling-lofted boss/base 00:00:00
    • part modeling-boundary boss base 00:00:00
    • part modeling-swept boss base 00:00:00
    • part modeling-swept cut 00:00:00
    • part modeling-loft cut 00:00:00
    • part modeling-boundry cut 00:00:00
    • part modeling-wrap 00:00:00
    • part modeling-intersect 00:00:00
    • part modeling-combine,split tool 00:00:00
    • part modeling-projected curve and compositive curve 00:00:00
    • AutoCAD Groups & Attributes Quiz In Tamil 00:02:00
    • part modeling-EXERCISE-01 00:00:00
    • part modeling-EXERCISE-02 00:00:00
    • part modeling-EXERCISE-03 00:00:00
    • part modeling-EXERCISE-04 00:00:00
    • part modeling-EXERCISE-05 00:00:00
    • part modeling-EXERCISE-06 00:00:00
    • Assembly-introduction standard mates 00:00:00
    • Assembly-Advanced mates 00:00:00
    • Assembly-Exercise 01 00:00:00
    • ASSEMBLY-linear couplar mate 00:00:00
    • ASSEMBLY-Gear,rack and pinion mate 00:00:00
    • ASSEMBLY-Universal coupling part assembly part -01 00:00:00
    • ASSEMBLY-Universal coupling part Assembly part-02 00:00:00
    • ASSEMBLY-HINGE AND CAM MATE 00:00:00
    • ASSEMBLY-Universal mate,screw mate,exploded view 00:00:00
    • ASSEMBLY-SLOT MATE 00:00:00
    • ASSEMBLY- BELT AND CHAIN feature 00:00:00
    • ASSEMBLY-NEW PART 00:00:00
    • ASSEMBLY-Component preview,window,pattern 00:00:00
    • ASSEMBLY-Exercise-car_Jack 00:00:00
    • ASSEMBLY-BILL OF MATERIAL,MATE REFERENCE 00:00:00
    • DRAWING-INTRODUCTION 00:00:00
    • DRAWING-MODEL VIEW STANDARD 3 VIEWS,PROJECTED VIEW,AUXILIARY VIEW 00:00:00
    • DRAWING-SECTION VIEW,DETAILED VIEW 00:00:00
    • DRAWING-BROKEN OUT SECTION VIEW,CROP VIEW,BREAK 00:00:00
    • DRAWING-ALTERNATE POSITION VIEW,PREDEFINED VIEW,EMPTY VIEW. 00:00:00
    • DRAWING-SMART DIMENSIONS 00:00:00
    • DRAWING-MODEL ITEMS,SPELL CHECKER,FORMAT PAINTER,NOTES,LINEAR NOTES PATTERN & CIRCULAR NOTES PATTERN. 00:00:00
    • BALLOON,AUTO BALLON, MAGNETIC LINE, HOLE CALL OUT, SURFACE FINISH SYMBOL 00:00:00
    • Congrats ! Submit the course completion form. Unlimited
top